In modern agricultural technology and industrial fluid management, efficient water transmission is critical. The demand for reliable CE Certified electric irrigation pump motors has increased globally as farming operations modernize and infrastructure standards tighten. Electric pump motors are key to powering high-pressure sprinkler systems, deep-well turbine pumps, and municipal diversion structures. These systems require consistent performance under continuous duty cycles, high humidity, and variable loads.
For B2B procurement officers, EPC contractors, and agricultural pump distributors, choosing the right motor brand requires balancing initial capital cost with long-term operational efficiency. Irrigation motors must be designed to withstand dust, direct sunlight, moisture, and fluctuating line voltages. By sourcing motors certified under European CE directives, operators ensure compliance with electrical safety, mechanical robustness, and environmental protection guidelines. This technical whitepaper reviews the engineering, brand heritage, structural components, and application range of Wolong Electric's high-efficiency pump motors.
Shaanxi Nanfang Motor Technology Co., Ltd. is the authorized distributor of Wolong. Founded in 1984, Wolong Electric Drive Group Co., Ltd. was successfully listed on the Shanghai Stock Exchange in 2002 (code SH600580). Over the past three decades, Wolong has grown to establish 3 manufacturing bases, 39 state-of-the-art factories, and 3 global R&D centers, securing a leading position in motor manufacturing and control system development worldwide.
To become a leading manufacturer of AC motors and drives worldwide, Wolong expanded through strategic acquisitions of European and American industrial legacy brands, transferring decades of engineering expertise into its core product portfolio:
In 2011, Wolong acquired Austrian ATB Group (ATB motor), becoming the parent controller of one of Europe's largest motor manufacturing bodies. The ATB acquisition brought in Morley, a specialized manufacturer with over 130 years of history in underground coal mining equipment, and Laurence Scott, a pioneer in high-reliability low-starting-current naval and nuclear power plant generator systems.
An established electric motor designer and manufacturer with over a century of experience. Brook Crompton is known for energy-efficient designs and introduced premium "W" and "10" series low, medium, and high-voltage motors for harsh industrial environments.
Founded in Germany in 1882, Schorch motors are widely used in critical industrial projects. They supply drive systems for water supply, wastewater management, chemical plants, and heavy steel processing plants globally.
Since partnering with OLI in 1999, Wolong has expanded its reach in industrial vibration motor markets, holding a significant share of the global market for MVE vibration motors and sensors.
Acquired in 2015, CNE (Nanyang Explosion-Proof Group) is one of China's largest facilities for explosion-proof motor research. This acquisition strengthened Wolong's capabilities in oil, coal, gas, and nuclear power sectors.
Furthermore, in 2018, the commercial and industrial division of General Electric (GE) joined Wolong. As a pioneer in electrical systems, GE brought engineering resources to heavy industries like mining, metallurgy, water treatment, and materials processing, solidifying Wolong's global reach.
Our motors are designed to support a wide range of industrial applications, providing high reliability for fluid dynamics and raw material processing. From localized agricultural systems to complex industrial installations, Wolong's motors are engineered for energy efficiency and long operational lifetimes under demanding conditions.
Powers large-scale surface water intakes, river water diversion, deep-well agricultural pumping, and centralized sprinkler networks. These motors provide consistent performance during high-temperature irrigation seasons.
Highly resistant flameproof designs suitable for conveyors, ventilation blowers, and underground pumps. Built to handle mineral dust, moisture, and abrasive atmospheres typical of mine operations.
ATEX and IECEx-certified drive systems designed for hazardous environments. These systems are used for pumping combustible liquids, gases, and refined hydrocarbons safely.
Our motors are designed using digital multi-physics simulations to evaluate mechanical stresses, thermal loads, and magnetic field distribution. This structural design helps ensure high operational reliability and low maintenance requirements.
The rotor features a squirrel cage design, with cast aluminum rotors used in smaller to medium frame sizes. These are manufactured using centrifugal aluminum casting or high-pressure die-casting, which integrates the rotor bars and end rings into a single-piece construction for mechanical strength and reliable starting torque.
For larger high-voltage motors, copper bar rotors are used. The copper bars are secured into the core slots and welded to the end rings. High-speed models also include a protective retaining ring to help prevent bar deflection at high operating speeds.
The stator coils are wound using copper conductors insulated with polyester film and glass cloth, combined with high-grade mica tape. The fully wound stator assembly undergoes a Vacuum Pressure Impregnation (VPI) process.
VPI introduces solventless epoxy resin under deep vacuum and pressure, filling all voids within the stator core slots. This process is followed by thermal curing to polymerize the resin, which protects the stator windings from moisture, chemical agents, and vibrational stresses while improving heat dissipation.
The motor frames are designed using structural and fluid-dynamics simulations. Manufactured from high-strength cast iron or structural steel, they feature cast-in cooling fins to optimize surface-to-air heat transfer.
The frame structure is designed to limit internal resonance and withstand mechanical shocks, such as pump water hammer. Double-shielded bearings with grease replenishment systems are standard, supporting radial and axial loads from directly coupled pumps.
The low-noise ventilation system consists of an aerodynamic fan cover body, an internal air guide cylinder, protective inlet screens, and integrated sound dampening plates. The side-inlet air design minimizes flow restrictions behind the motor, reducing noise levels caused by air turbulence.
The fan blades are dynamically balanced to limit high-frequency vibration. The fan cover is rated IP22, preventing accidental contact with rotating parts while allowing sufficient cooling airflow over the motor frame.
Wolong products meet a range of international standards, enabling deployment in regulated industrial markets. Our manufacturing facilities are certified to ISO 9001 and regularly audited by third-party certification bodies.
Nemko/Atex
CSA
CE
CCC
SABS
TESTSAFE
To enter different global regional markets, the entire electric motor range is qualified under major international standards, easing compliance verification for engineering and procurement firms:
Our pump motors are designed to operate under variable supply conditions. When deployed in remote agricultural regions or industrial fields, grid voltages can drop significantly. Wolong motors feature dynamic voltage tolerances (typically ±10% on primary ratings) and low-starting-current windings to prevent line voltage drops from tripping regional substations.
Additionally, with the adoption of Variable Frequency Drives (VFDs) in modern pump stations, our motors include insulated non-drive end bearings and reinforced slot insulation to mitigate shaft currents. This protection is critical when using high-carrier frequency PWM drives, which can cause micro-arcing and bearing wear over time. By incorporating VFD-ready configurations, operators can adjust pump performance to match exact system demand, reducing energy consumption by up to 50% compared to fixed-speed throttle valves.
CE certification confirms that the electric motor complies with EU directives, including the Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), and RoHS. For international buyers, it serves as a baseline standard for electrical and operational safety.
Precision dynamic balancing limits structural vibration, reducing wear on the motor's radial bearings and the shaft seals of the connected water pump. This reduces maintenance requirements and extends the seal lifetime.
Vacuum Pressure Impregnation (VPI) replaces air pockets in the stator coils with solid cured epoxy resin. This process seals the windings against moisture ingress and condensation in high-humidity agricultural environments.
Yes, Wolong manufactures standard and custom induction and PMSM motors designed for VFD operation. They include reinforced slot insulation and optional insulated bearings to prevent shaft current damage.
NEMA standards dictate physical sizes in inches and specify electrical profiles suited for North American markets (typically 60Hz). IEC standards use metric dimensions and are standard in European and Asian markets.
Custom shaft dimensions, specialized paint systems, and alternative junction box positions are available. Lead times vary depending on frame size, customization, and factory scheduling. Contact our sales department for details.
NANFANG
